Moyes Delta Gliders

Litespeed RS - Options

Moyes highly recommends the basic option package of Mylar sail, Zoom frame with Carbon speed bar,

Carbon leading edge rear sections and Carbon dive sticks for a perfect all round performing and handling glider.

Technora

Technora Inlaid Mylar Sail

  • UV resistant, ultra-light weight with very low stretch and high tensile strength
  • Transparent mainsail inlaid design
  • The weight of the Technora sail is the same as the Code Zero sail
  • PX20 on the leading edge for durability
  • PX10 on the trailing edge for handling
silver coloured PX

Silver PX Inlaid Mylar Sail

  • Has the same durability and weight as the White PX TI02
  • Semi-transparent smoke coloured mainsail inlaid design
  • PX20 on the leading edge for durability
  • PX10 on the trailing edge for handling
px_inlaid

White PX Inlaid Mylar Sail

  • PX cloth with internal taffeta
  • Durable and long lasting
  • Inlaid design
  • Lightweight PX5 mainsail
  • PX20 on the leading edge for durability
  • PX10 on the trailing edge for handling
  • Sail surface finished with Titanium Oxide to reduce UV effects

zoom_carbon

Zoom Uprights with Carbon Fibre Performance Speed Bar

  • Zoom Uprights:
  • Extremely low drag aerodynamic profile
  • Extruded aluminium
  • Anodised matt black finish
  • Carbon Speed Bar:
  • Aerodynamic profile
  • Hand laid pre-impregnated carbon fibre
  • Internal pressure cured at very high temperatures to ensure an attractive and durable finish
  • Comfortable round hand grips
  • Improved fittings that allow the upright to rotate an extra 45 degrees to avoid the fitting being damaged when the upright is damaged
carbon_outer

Carbon Fibre Outer Leading Edge

  • Lighter than aluminium by approximately 700 grams
  • Decreasing wing tip inertia, thus improving the maneuverability of the glider
  • Same stiffness with improved overall strength
  • Because this weight reduction takes place at the tip of the glider, this option has the most significant reduction in roll inertia of any further change to the glider configuration
carbondivestruts2

Carbon Fibre Dive Struts

  • Weight saving over aluminium by approximately 360 grams
  • Unique design with a spoon bill tip and tapered to the trailing edge
  • Added wall thickness for strength where needed
  • Refined designed to achieve the lightest and strongest product possible
  • As with the outboard leading edges this weight reduction is biased toward the wing tip, thereby having an enhanced effect in the effort to reduce roll inertia
carbon_battens

Carbon Batten Set

  • 4 Mainsail battens
  • 2 Undersurface battens
  • Improved stiffness with carbon aids pitch stability
  • Provides improved pitch stability
inner_le

Carbon Fibre Inner Leading Edge

  • Further reduces the overall weight of the glider, by approximately 900 grams.
  • Reduced glider weight translates into improved maneuverability.
leading_edge_inserts

Carbon Fibre Leading Edge Inserts

  • Lightweight yet strong
  • Improved pitch and yaw stability
  • Innovatively incorporates a thin balsa insert for added stiffness
  • Helps maintain an aerodynamic profile between the ribs providing a clean, smooth leading edge surface, especially at high speeds
carbon_keel

Carbon Fibre Keel

(temporarily unavailable)

  • Slimline design, low drag carbon fibre keel designed by Gerolf Heinrichs and Theo Klafsky.
  • Pre-impregnated carbon keel consists of a recessed, female pressure formed, keel mid section with modified 'Bailey Block' and a mid section cover to enclose the pull back cables
  • The rear keel incorporates a replaceable plastic 'wear resistant' foot
 zoom_fast

Zoom Upright with FAST Aerodynamic Aluminium Speed Bar

  • Zoom Uprights:
  • Extremely low drag aerodynamic profile
  • Extruded aluminium
  • Anodised matt black finish
  • Fast Speed Bar:
  • Low drag aerodynamic profile
  • Aluminium and anodised in a matt black finish to match the Zoom uprights
 standard_fast

Aerofoil Upright with FAST Aerodynamic Aluminium Speed Bar

  • Aerofoil Uprights:
  • low drag aerodynamic profile 60 mm
  • anodised bright dip finish
  • Fast Speed Bar:
  • low drag aerodynamic profile
  • extruded aluminium
  • anodised bright dip finish to match the aerofoil uprights
 standard_round

Aerofoil Uprights with Round Speed Bar

  • Aerofoil Uprights:
  • low drag aerodynamic profile 60 mm
  • anodised bright dip finish
  • Round Speed bar:
  • Round drawn aluminium tube
  • anodised bright dip finish
  • non slip rubber hand grips
 water-proof-glider-bag

Optional Glider Bags

 

 

 

Part Kg Lb
2 x Aluminium Back Section Leading Edges 1.76 3.88
2 x Carbon Back Section Leading Edges 1.06 2.337
Weight Saving 0.7 1.543

1 x Set Alloy Battens 2.31 5.093
1 x Set Carbon Battens 2.23 4.916
Weight Saving 0.08 0.177

1 x Set of 4 Alloy Dive Struts 0.84 1.852
1 x Set 4 Carbon Dive Struts 0.48 1.058
Weight Saving 0.36 0.794

2 x Aluminium Front Section Leading Edges 4.28 9.436
2 x Carbon Front Section Leading Edges 3.46 7.628
Weight Saving 0.82 1.808

2 x Fibreglass Tip Wands 0.39 0.86
2 x Carbon Tip Wands 0.26 0.573
Weight Saving 0.13 0.287

Total Weight Saving 2.09 4.609

 

Part Kg Lb
1 x Code Zero Sail 8.46  18.651
1 x Dacron Sail 8.64 19.048
1 x Mylar Sail 9.13 20.128
1 x Carbon Speed Bar 1.11 2.447
1 x Aluminium Speed Bar-Fast 1.04 2.293
1 x Aluminium Round Speed Bar 0.78 1.72
2 x Zoom Uprights 2.08 4.586
2 x Aerofoil Uprights 1.87 4.123
2 x Round Uprights 1.46 3.219